Crane Rail (QU100 / QU120)

Crane Rail (QU100 / QU120)

Heavy crane rail for overhead travelling cranes, gantry and shipyard cranes
Send Inquiry
Chat Now
Description
Technical Parameters

Product Overview

Crane rail is the heavy, wide-base profile laid on crane girders for overhead travelling cranes, gantry cranes, shipyard cranes and heavy transfer equipment. QU100 and QU120 are the two sections most specified from China: a broad, thick head that takes the wheel load of a loaded trolley, and a base wide enough to sit on a rail pad and clip without rocking.

The difference from a light rail section is not just size. Crane rail runs at low speed but very high wheel load, so the failure modes are different: head crushing and side wear where the trolley crabbes, fatigue at the web-to-base fillet, and loosening of the clip if the base is not flat. That is why straightness, base flatness and end squareness matter as much as chemistry.

We supply QU100 and QU120 in U71Mn, 12.5 m as standard, plain or drilled to the fishplate pattern, and can quote the matching rail clips, pads and fishplates so the runway is built from one source.

Key Advantages

  • Correct heavy profile. QU100 and QU120 dimensions to the Chinese crane rail standard, matched to standard clips and pads.
  • Wear and crushing resistance. U71Mn chemistry with head hardness controlled for wheel contact, not for railway speeds.
  • Base flatness. The base is checked flat, because a rocking rail works its clip loose and cracks the girder weld.
  • Ends to your drawing. Drilled to the fishplate pattern, plain for site drilling, or cut square for welded joints.
  • One source for the runway. Rail, clips, pads and fishplates quoted together, so the profiles are guaranteed to fit.

Technical Specifications

ParameterQU100QU120
Nominal weight88.96 kg/m118.1 kg/m
Height150 mm170 mm
Head width100 mm120 mm
Base width150 mm170 mm
Web thickness36 mm44 mm
Standard length12.5 m12.5 m
Steel gradeU71MnU71Mn
EndsPlain / drilledPlain / drilled
AccessoriesClips, pads, fishplates, boltsClips, pads, fishplates, bolts

Step-by-Step Manufacturing Process

  1. Steelmaking. High-carbon, high-manganese heat with low sulphur for fillet fatigue resistance.
  2. Casting and conditioning. Bloom cast, surface conditioned to remove inclusions before rolling.
  3. Rolling. Shaped passes form head, web and base; head is rolled to the crane rail crown radius.
  4. Straightening. Roller straightening, then base flatness and camber checks.
  5. End work. Saw cut to length; drilling to the fishplate pattern on request.
  6. Inspection and marking. Dimensions, hardness, surface and heat number.

Quality Assurance & Certificates

  • EN 10204 3.1 certificate per heat with chemistry, tensile and hardness
  • Dimensional report: height, head width, base width, web thickness, length
  • Base flatness and straightness measurement
  • Surface inspection with photographs
  • Accessory dimensional check when clips and fishplates are supplied together

Core Applications

  • Overhead travelling cranes in steel mills, workshops and warehouses
  • Gantry and portal cranes at ports, container yards and precast plants
  • Shipyard cranes and heavy fabrication halls
  • Transfer cars and furnace charge machines
  • Crane runway replacement where the existing rail is worn or cracked

FAQ

QU100 or QU120?

By wheel load and crane capacity. QU120 carries the heavier end of the range; if the crane manufacturer specifies a section, follow it - the clip and pad geometry is profile-specific.

How is it shipped?

12.5 m lengths in bundles, loaded on flat racks or in breakbulk. Weight per bundle is kept within the crane capacity at the destination port.

Do you supply the clips?

Yes - welded or bolted clips, rubber or composite pads, fishplates and bolts can be quoted with the rail so the runway is complete from one supplier.

Crane Rail (QU100 / QU120)Crane Rail (QU100 / QU120)Crane Rail (QU100 / QU120)Crane Rail (QU100 / QU120)

Frequently asked questions

What does the Crane Rail specification cover?

Nominal weight: 88.96 kg/m; Height: 150 mm; Head width: 100 mm.

Where is Crane Rail used?

Overhead travelling cranes in steel mills, workshops and warehouses; Gantry and portal cranes at ports, container yards and precast plants; Shipyard cranes and heavy fabrication halls.

What documentation is supplied with Crane Rail?

EN 10204 3.1 certificate per heat with chemistry, tensile and hardness; Dimensional report: height, head width, base width, web thickness, length.

Send Message