Cold Drawn Bright Bar (C45 / 1045)

Cold Drawn Bright Bar (C45 / 1045)

Bright, close-tolerance bar for machining, shafts, fasteners and hydraulic parts
Send Inquiry
Chat Now
Description
Technical Parameters

Product Overview

Bright bar is round bar that has been cold drawn, turned or peeled and ground after hot rolling, so it arrives straight, to a close diameter tolerance and with a clean skin. Machinists specify it because the bar can go straight into an automatic lathe without the scale, ovality and diameter scatter of hot rolled stock.

C45 (the Chinese designation for 1045) is the general-purpose medium-carbon grade: enough carbon to harden and wear, enough toughness to machine and take a thread. It is the standard choice for shafts, spindles, studs, nuts, hydraulic piston rods and general engineering parts that are induction hardened or used as supplied.

We supply C45, 1045 and 41Cr4 bright bar from 6 to 80 mm, cold drawn to h9 or h11, or peeled and ground where surface finish matters, in 3 to 6 m lengths with straightness controlled.

Key Advantages

  • Close tolerance. h9 or h11 on diameter, so the bar fits a collet or a bearing seat without extra turning.
  • Clean skin. Decarburisation and scale removed - the surface the tool meets is the surface specified.
  • Straightness. Controlled straightness matters for bar feeders; a bent bar stops an automatic lathe.
  • Machinability. C45 machines predictably, threads cleanly and responds well to induction hardening.
  • Alternatives on the same order. Peeled and ground for hydraulic rod, 41Cr4 where hardenability is the requirement.

Technical Specifications

ParameterC45 / 104541Cr4 / 5140
Carbon0.42–0.50%0.38–0.45%
Manganese0.50–0.80%0.60–0.90%
Chromiummax 0.40%0.90–1.20%
Diameter range6–80 mm10–80 mm
Toleranceh9 / h11h9 / h11
ConditionCold drawn / peeled + groundCold drawn / annealed
Length3–6 m3–6 m
Straightness0.5 mm/m typical0.5 mm/m typical
Surface roughnessRa 1.6 or better (ground)Ra 1.6 or better (ground)

Step-by-Step Manufacturing Process

  1. Hot rolled wire rod or bar. Chemistry and cleanliness controlled at steelmaking; medium-carbon heats are killed and conditioned.
  2. Pickling and coating. Oxide removed and a drawing lubricant carrier applied.
  3. Cold drawing. Drawn through a die to the ordered diameter, which raises yield strength and improves surface.
  4. Annealing. Softening after heavy reduction, so the bar stays machinable.
  5. Straightening and cutting. Roller or rotary straightening, cut to length.
  6. Peeling and grinding where hydraulic or bearing-grade finish is required.

Quality Assurance & Certificates

  • EN 10204 3.1 certificate per lot: chemistry, tensile, yield, elongation, hardness
  • Diameter and tolerance report across the length
  • Straightness measurement
  • Surface inspection - seams, laps, decarburisation depth where specified
  • Ultrasonic test available for hydraulic rod stock

Core Applications

  • Shafts, spindles and axles in machinery and pumps
  • Hydraulic piston rods - peeled and ground, often with chrome plating
  • Fasteners and studs - threaded from bright bar for consistent thread quality
  • Gears and sprocket blanks before hobbing
  • General machined parts in jobbing and production shops

FAQ

Cold drawn or peeled and ground?

Cold drawn for general machining and threads; peeled and ground when the surface is a sealing or bearing surface, as on hydraulic rod. Ground bar costs more but removes the subsurface defects that cause seal wear.

Can C45 be hardened?

Yes - it responds to induction and quench-and-temper hardening. For sections above roughly 20 mm, 41Cr4 gives better through-hardening.

What tolerance can you hold?

h9 as standard, h8 on selected sizes with ground finish. State the fit at enquiry, because it decides whether drawing or grinding is the right route.

Frequently asked questions

Which standard and sizes does Cold Drawn Bright Bar come in?

Carbon: 0.42–0.50%; Manganese: 0.50–0.80%; Chromium: max 0.40%.

What applications is Cold Drawn Bright Bar specified for?

Shafts, spindles and axles in machinery and pumps; Hydraulic piston rods - peeled and ground, often with chrome plating; Fasteners and studs - threaded from bright bar for consistent thread quality.

Which certificates come with Cold Drawn Bright Bar?

EN 10204 3.1 certificate per lot: chemistry, tensile, yield, elongation, hardness; Diameter and tolerance report across the length.

Send Message