Steel Arrives Rusty: Inspection, Claim and Prevention

Nov 13, 2026

Leave a message

Steel Arrives Rusty: Inspection, Claim and Prevention

Rust on arrival is the most common quality dispute in steel trading, and the hardest to settle - because by the time it is visible, the evidence of when it started is gone. What decides the outcome is what you do in the first 48 hours.

First: classify what you are looking at

White rust (zinc oxide) on galvanized or aluzinc surfaces: a powdery white deposit. It is a surface condition, not a section loss, and it can often be treated. It forms when moisture sits on the coating without air circulation.

Red rust (iron oxide) on cold rolled, hot rolled or at cut edges: actual base metal corrosion. Depth matters. Surface bloom that wipes off is cosmetic; pitting that catches a fingernail is not.

Stained but intact: discolouration from condensation, usually without metal loss. It is a commercial issue rather than a structural one, but it still needs documenting.

The 48 hour protocol

  1. Photograph before unloading. Container seals, door interior, the stow, then the first damaged bundle in place.
  2. Photograph with scale. A tape measure in the frame, so the extent is measurable.
  3. Record the position. Which bundle, which layer, which face - top of the stack rusts from condensation, bottom from floor moisture.
  4. Sample. Keep a piece, or at least the wrap and the desiccant bag.
  5. Notify in writing within the claim period, with the photos and the heat numbers. Most contracts give 15 to 30 days; silence is usually treated as acceptance.

What the evidence usually shows

  • Rust on the top layer only → container rain. The packing or the desiccant was insufficient for the route.
  • Rust on the bottom wrap → floor moisture. No dunnage, or dunnage that was wet when loaded.
  • White rust across a whole coil face → the wrap was cut at some point, or the coil was stored unwrapped.
  • Rust at edges only → mechanical damage to the edge protection, followed by moisture ingress.
  • Rust in patches near the door → water entered through the door seals in transit.

Each pattern points to a different party, which is why the photos matter more than the description.

Prevention that actually works

VCI film on the coil, desiccant sized to the voyage, dunnage at floor and door, edge protectors, and a receiving note that tells the port agent what to check first. On a 30 day route through the tropics, none of that is optional.

How we handle claims

We ship with pre-shipment photos of the stow and the packing, which is the baseline for any dispute. If material arrives damaged, we ask for the five items above and respond with a position within 48 hours: replacement, credit, or a treatment plan. Where the cause is our packing, we fix it on the next shipment rather than negotiating each time.

If you are receiving steel regularly, ask for the packing photos with the documents. It costs nothing and it turns a dispute into a fact check.

Related: Packaging for long sea routes, Steel coil storage and handling, EN 10204 3.1 certificate

Frequently asked questions

What is the difference between white rust and red rust?

White rust is zinc oxide on the coating surface; red rust is base metal corrosion. Only the second involves section loss.

How quickly must a claim be raised?

Within the contractual claim period, usually 15 to 30 days, with photos taken before unloading.

Which rust pattern points to container rain?

Rust on the top layer only, with the lower layers clean.