
Most buyers ask for "a mill certificate" and accept whatever PDF arrives. That is how 3.1 certificates get confused with 3.2, with 2.2, or with a certificate that covers a different heat than the steel in the container.
Here is what the document actually means, and what to look at before you release payment.
The three certificate types that matter
| Type | Who issues it | Who verifies | What it proves |
|---|---|---|---|
| 2.2 | Manufacturer | Nobody independent | Composition, no test results required |
| 3.1 | Manufacturer's authorised inspection representative | Manufacturer only | Test results from the producing mill's own lab |
| 3.2 | Manufacturer + independent inspection body | Third party (SGS, BV, TÜV, etc.) | Same tests, independently witnessed |
3.1 is the default for structural and pressure work in Europe. 3.2 is only issued when the contract names an independent inspector who actually attends the tests - if a supplier offers "3.2" without an inspection contract, it is a 3.1 with a nicer letterhead.
What must be on a valid 3.1
- Heat number and, for plates, the individual plate number
- The standard the steel is made to (EN 10025-2, ASTM A516, EN 10216-2 …)
- Chemical composition per heat, with the actual values not just limits
- Mechanical results: yield, tensile, elongation, and impact values with test temperature
- The authorised inspection representative's signature and stamp - not a photocopied stamp
- Delivery condition (as rolled, normalized, quenched and tempered)
If any of those is missing, the certificate is decoration. A 3.1 without impact values at the specified temperature is not proof of an impact-tested grade.
Four checks that catch real problems
- Match the heat number to the marking. Every plate or bundle is stamped or stencilled with the heat number. Pick two at random and compare.
- Match quantities. The certificate covers specific pieces. If the mill certificate lists 12 plates and the packing list says 40, ask which heat the other 28 came from.
- Check the test temperature, not just the grade name. S355J2 tested at +20 °C is not S355J2.
- Look at the lab. A certificate issued by a trading company's own "lab" is not a 3.1 in the EN 10204 sense; the issuer must be the manufacturer or its authorised representative.
How we handle documentation
We treat the certificate as part of the product, not as paperwork that gets sorted out at the end:
- One 3.1 certificate per heat, issued by the producing mill, matched line by line to our packing list
- Certificate, packing list, commercial invoice and bill of lading cross-checked before the container leaves the yard
- Third-party inspection with SGS, BV or Intertek organised on request, with the inspector attending at the mill or at the port
- If your project needs 3.2, we tell you up front what the inspection contract costs and how it changes the lead time - we do not relabel a 3.1
For buyers who need to file certificates with an authority or a client, we can also supply the mill's full test report and, where the product is subject to it, the relevant declaration of performance.
Related products: Hot rolled plates, Steel pipes, Fasteners
Related reading
Frequently asked questions
What is the difference between EN 10204 3.1 and 3.2?
A 3.1 certificate is issued by the manufacturer's authorised inspection representative. A 3.2 requires an independent inspection body to witness the tests, which means an inspection contract.
Who is allowed to issue a 3.1 certificate?
The producing mill or its authorised representative. A certificate issued by a trading company's own laboratory is not a 3.1 in the EN 10204 sense.
Does a 3.1 certificate prove the steel was impact tested?
Only if the certificate shows the test temperature and the individual impact values. A grade name alone proves nothing.


